Description
Makita DTD154RTJ LXT 18V Brushless Impact Driver with 2x 5.0Ah Batteries
The Makita DTD154RTJ LXT® 18V Impact Driver is an extra-compact, lightweight, brushless tool for quick and efficient driving. Featuring a 1/4" hex drive shank, this impact driver delivers a maximum fastening torque of 175 Nm and operates at speeds up to 3,600 min⁻¹. It offers three power settings for versatile performance, making it ideal for various driving tasks. Additionally, it comes equipped with a convenient LED light for enhanced visibility in low-light conditions. The DTD154RTJ comes in a Makpac Type 3 case with 2x 5.0Ah batteries and a charger.
DTD154RTJ Features:
- The DTD154 brushless impact driver features high operation efficiency with a 175Nm max torque, 4 pole motor, keyless single sleeve ¼” hex chuck, accepting M5 – M14 standard bolts, M4 – M8 machine screws making it ideal for repetitive screwdriving.
- The impact driver has a no load speed of 3600rpm providing up to 3800ipm, the percussive action saving time and effort, driving screws up to 30% faster than a conventional drill/driver, no pilot hole is needed even into hardwood.
- It features a maintenance free brushless motor for increased life, electronic brake, a conveniently located push button for forward and reverse and an LED job light with preglow for use in low visibility applications.
- The compact & lightweight 1.5kg design of the DTD154 makes transportation around the worksite easy without compromising on power, whilst the redesigned belt clip and ergonomic soft grip handle provides maximum user comfort reducing fatigue on prolonged use, providing greater tool control.
DTD154RTJ Specification:
- Voltage: 18 v
- Standard Bolt: M5-M16
- High Tensile Bolt: M5-M14
- Coarse thread (length): 22 - 125 mm
- Max Fastening Torque: 175 Nm
- Battery Type: Lithium-ion
- Vibration: Fastening Bolt: 12.5 m/sec²
- Vibration K factor: 1.5 m/sec²
- Noise sound pressure: 96 dB(A)
- Noise sound power: 107 dB(A)
- Noise K factor: 3 dB(A)
- Net weight: 1.5 kg
- Impact Selection: 3 stage + Tek mode
- Driving Shank: 6.35mm (1/4") Hex
- Blows per Minute (Hi) - ipm: 0 - 3800 ipm
- Blows per Minute (Med) - ipm: 0 - 2600 ipm
- Blows per Minute (Lo) - ipm: 0 - 1100 ipm
- Machine Screw: M4-M8
- No Load Speed (hard/med/soft): 0-3600 / 2100 / 1100 rpm
What is included:
- 1x DTD154Z 18V Brushless Impact Driver
- 2x 5.0 Li-ion Battery Packs
- 1x DC18RC Battery Charger
- 1x Makpac Type 3 Connector Case
- 1x Belt Hook