Makita DLX2131TJ 18V LXT Combi Drill & Impact Driver Twin Kit with 2x 5.0Ah Batteries

Description

Makita DLX2131TJ 18V LXT DHP482 Combi Drill & DTD152 Impact Driver Twin Kit with 2x 5.0Ah Batteries

The DLX2131 Twin Kit from Makita will replace the DLX2012 Twin Kit and contains models DHP482 and DTD152 with 2 x 5.0Ah Lithium-Ion Batteries. The DHP482 18V LXT Combi Drill from Makita is a compact and precise power tool for the professional or DIY enthusiast. It features an all-metal gear construction for extra high transmission durability as well as an electric brake and variable speed control trigger. You will find this an extremely comfortable drill to use with its ergonomic soft grip handle and lightweight design.

Model DTD152 is a cordless impact driver powered by 18V Li-ion battery and developed for main applications such as tightening of self-drilling screws or light duty machine screws. Model DHP482 is a cordless hammer driver drill that has been developed as the successor to the model DHP456 and the DTD152 has been developed as the successor to the model DTD146. Supplied in a Makpac type 3 connector case.

Features and Specification:

DTD152 Impact Driver:

• Electric Brake
• Battery Capacity Indicator: No
• Variable speed control trigger
• Forward/reverse rotation
• Twin LED job light
• High rotation speed
• One-touch bit installation
• Ergonomically designed soft grip handle
• Compact overall length of 137mm
• Lightweight design
• Battery protection circuit
• Belt clip
• Battery Type: Li-ion
• Voltage: 18V
• Driving Shank: 6.35mm (1/4" Hex)
• Machine Screw: M4-M8
• Standard Bolt: M5-M16
• High Tensile Bolt: M5-M12
• Coarse Thread: 22-125mm
• Impacts per minute: 0-3500 ipm
• No Load Speed: 0-2900 rpm
• Max Tightening Torque: 165Nm
• Net Weight: 1.5 kg
• Sound Pressure: 93 dB(A)
• Sound Power: 104 dB(A)
• Sound K Factor: 3 dB(A)
• Vibration: 10.5 m/s²
• Vibration K Factor: 1.5 m/s²

DHP482 Combi Drill:

• Variable 2-speed, reversible motor
• Incorporates Makita's new battery protection system that provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life and overall battery life
• Extreme protection technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
• 21 clutch settings deliver up to 480 in. Lbs. of torque
• All metal gears for more efficient power transmission
• Ultra-compact design (only 7-3/4" long)
• Twin led jobs light with pre-glow and after-glow functions
• Improved ergonomic soft rubber grip design for vibration absorption and comfortable operation features re-contoured rear grip portion and ribbed grip for improved hold
• Voltage: 18v
• Soft Application Max Torque (Nm): 36
• Hard Application Max Torque (Nm): 62
• Torque Settings: 21 + Drill
• Brake Type: Electric
• No. of Gears: 2
• LED Job Light: Yes / Twin / Pre-glow & After-glow
• Battery Capacity Indicator: No
• Battery Compatibility: 18v Lithium-Ion (LXT)
• Rotation: Forward / Reverse
• Variable Speed Control Trigger: Yes
• No Load Speed (RPM) High: 0-1900
• No Load Speed (RPM) Med: N/A
• No Load Speed (RPM) Low: 0-600
• Chuck Type: 3-Jaw / Single Sleeve Keyless
• Chuck Capacity (mm): 13
• Screw Capacity: Machine Screw (mm): 6
• Screw Capacity: Wood Screw (mm): 10 x 90
• Drill Capacity: Concrete (mm): 13
• Drill Capacity: Metal (mm): 13
• Drill Capacity: Wood (mm): 38
• Impact Rate (BPM) High: 0-28500
• Impact Rate (BPM) Med: N/A
• Impact Rate (BPM) Low: 0-9000
• Overall Length (mm): 198
• Net Weight (Approx. Kg) with 1.5/2Ah Batt: 1.5
• Net Weight (Approx. Kg) with 3/4/5Ah Batt: 1.8
• Brushless Motor: No

DC18RC Charger:

• Fast charging - charges Li-Ion 3.0Ah battery in only 22 minutes
• Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
• Forced air cooling fan - cools the battery to minimise charging time
• Digital power display identifies the condition of the battery and charging condition
• Makita’s 18v & 14v batteries have a built in memory chip that records the battery usage history. While the battery is connected it will transmit the data to the charger
• A great advantage of Lithium Ion technology is that it provides the user with the possibility to charge the batteries anytime, without any need to wait for their complete power deployment. A great improvement compared to older technologies like Ni-Cad

BL1850B 5.0Ah Battery:

• Foam cell technology
• Slide on battery - firm holding with multi contacts and shock absorbing pack, will not puncture and remains cool even in heavy use
• Unbeatable 45 minute charge time
• Same weight and size as 3Ah or 4Ah battery
• Works with your current Li-ion Chargers
• Longer run time and battery life
• Capacity indicator LED's
• BL1850B Specification
• Voltage: 18v
• Battery Type: Lithium-Ion
• Battery Voltage: 18v

Makpac Type 3 Case:

• Stackable for storage and easy transportation
• Different sizes to choose from
• Strong and collaspible handles
• Weight: 1.9kg
• Length: 396 mm
• Height: 210 mm
• Width: 296 mm

What is included:

• 1x DHP482 Combi Drill
• 1x DTD152 Impact Driver
• 2x BL1850 5.0Ah Li-ion Batteries
• 1x DC18RC Charger
• 1x Makpac Type 3 Case