APR Finance Available
Description
DeWalt DCK246P2T-GB 18V Twin Nailer Kit DCN930/DCN660N with 2 x 5.0Ah Batteries
The DeWalt DCK246P2T 18V Twin Nailer Kit includes the DCN930 18V XR Framing Nailer and the DCN660 18V XR 16G Finish Nailer, providing a versatile solution for various nailing tasks. The framing nailer is compatible with most paper tape nails and is optimised for DEWALT DNPT (Paper Tape) and DNW (Wire Welded) nails, while the finish nailer works with most angled 16ga brads and is optimised for DEWALT DNBA nails. Both nailers feature a brushless motor for enhanced durability, efficiency, and power. The kit has two 18V 5Ah batteries, a multi-voltage charger, and a TSAK mobile storage box (DWST1-75799) for easy transport and organisation. Additional features include a belt hook for convenience and precise depth control through extended wheel regulation.
Features & Specification:
DeWalt DCN660N 18V XR Brushless Second Fix Nail Gun:
- Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to 4 nails per second
- Depth of drive can be easily adjusted using the thumb wheel depth adjuster
- Compact, lightweight and ergonomic design makes the tool easy and comfortable to use but durable enough for worksite environment
- BRUSHLESS motor offers runtime that cannot be beaten in a compact package mechanical rather than gas operation offers low running costs and consistent performance at low temperatures
- Trigger and contact trip lock-off and prevent accidental dis-charge of fastener
- Tool free stall / jam clearance minimises down time
- Latest generation 18V XR Li-Ion Brushless 15Ga nailer offers the cutting edge in nailing technology
- Weight: 2.6 kg
- Nail Length: 32-63 mm
- Nail Diameter: 1.6 mm
- Magazine Angle: 20 °
- Magazine Capacity: 110 Nails
- Firing Actuation: Bump & Sequential
- Power Source: Cordless
- Battery Chemistry: Li-Ion
- Collation Type: Stick
- Fastener Type / Gauge: 16 Ga
- Width: 96 mm
- Height: 302 mm
- Noise LWA / KWA, 1s, d: 92/3
- Noise LpA / KPA, 1s, 1m: 81/3
- Vibration emission value ah: <2.5 m/s²
- Uncertainty K 1 (Vibration): 1.5 m/s²
DCN930 18V XR Brushless Framing Nailer:
- Cordless Convenience: Switching from a pneumatic nailer to this cordless DEWALT framing nailer can save up to 20 minutes daily in setup and clean-up time.
- Lightweight Design: Weighing just 4 kg (tool only), this nailer helps lighten your load on tough jobs.
- Innovative Nose Design: The redesigned nose allows for precise alignment, gripping, and driving of nails at aggressive angles, especially for Toe-Nailing applications.
- Minimised Downtime: Active Flywheel Technology in rapid sequential mode reduces ramp-up time between shots, helping minimise the time between shots.
- Quick Setup: No need for compressors or hoses; get to work immediately with this cordless nailer.
- Simplified Inventory Management: Track the tool in the TOOL CONNECT system (chip sold separately).
- Nail Capacity: It can handle nails up to 9cm long, making it ideal for tough jobs.
- On-Site Serviceability: Field-serviceable springs and driver blades reduce maintenance delays.
- Maximised Productivity: Install up to 530 sq ft of subflooring per charge and complete up to 100 ft of wall framing per charge.
- Powerful Performance: Equipped with a powerful brushless motor to handle various applications.
- Improved Nail Driving: Drives nails up to 72% more sub-flush than the previous generation.
- High-Strength Magnesium Magazine: Built with a high-strength magnesium magazine for enhanced durability.
- Battery Capacity: 5 Ah
- Magazine Angle: 30 degrees (Paper Tape)
- Nail Diameter: 0.113-0.131 inches
- Nail Length: 5-9 cm
- Power Supply: Cordless
- Motor Type: Brushless
- Product Weight: 3.92 kg
What is included:
- 1x 18V XR Framing Nailer
- 1x 18V XF 16GA Finish Nailer
- 1x Multi-Voltage XR Charger
- 2x 18V XR 5.0 Ah Battery Pack With State of Charge Indicator
- 1x TSTAK Mobile Storage Carry Case
