Makita HR4003C/1 Corded Rotary Demolition Hammer 1100W 110V

Description

Makita HR4003C/1 Corded Rotary Demolition Hammer 1100W 110V

The Makita HR4003C/1 is a 110V corded demolition hammer with 2-mode operation: Rotation with Hammering and Hammering only. Model HR4003C is the successor model of the HR4001C series models and developed to provide higher operating efficiency and more comfort with unrivalled low level of vibration.

HR4003C/1 Features:

• Variable speed control.
• Soft start
• Constant speed control
• One touch sliding chuck for easy bit installation and removal.
• Adapted for SDS-Max bits
• 2-mode operation: Rotation with hammering / Hammering only
• Easy to operate operation-mode change lever. Located on the top of the motor housing for reduced possibility of breakage.
• Torque limiter
• Serial number label located in a position protected from damage/scratching
• Ergonomic soft grip
• In hammering mode, on/off switch is switchable between two switches to meet your application: For Continous or Intermittent chiseling applications.
• LED service light indicates when to replace carbon brush.

HR4003C/1 Specification: 

• Impact energy: 8.3 J
• Max in concrete: 40 mm
• Max core diameter (TCT): 105 mm
• Blows per minute: 1450 - 2900 bpm
• Vibration K factor: 1.5 m/sec²
• Input wattage: 1,100 w
• Net weight: 6.2 – 6.4 kg
• No Load Speed: 250 - 500 rpm
• Vibration: Chiselling: 9.0 m/sec²
• Vibration: Hammer Drilling: 10.0 m/sec²
• Noise sound pressure: 92 dB(A)
• Noise K factor: 3 dB(A)
• Noise sound power: 103 dB(A)
• Optimum Drilling Range:16 - 35 mm
• Shank: SDS-MAX

What is included:

• 1x HR4003C/1 Rotary Demolition Hammer 1100W 110V
• 1x Side handle
• 1x Depth stop
• 1x Bit grease
• 1x Carry case